Unlimited Products
Racing Fiberglass & Carbon Fiber
|
|
|
|
|
AT44: This long aero-top will replace existing 'square' style windshield snorkel top. Will bolt directly to old base. Scoop bottom has a full flange w/hole cut. Rounded air intake maximizes air flow while reducing drag. Can also be mounted to flat hood.
|
|
|
|
|
|
|
SC714: Boat scoop. Same as SC713, but has bottom flange for mounting.
Dimensions:
W: 13"
L: 23-1/2"
H: 7"
Front opening is 11-1/2 x 3-3/8. Bottom flange is 1-1/2" wide. Bottom is oval shaped and is 21-1/4 long X 13 wide.
|
|
|
|
|
|
|
SC713: Boat scoop. Dimensions are 13" wide, 23-1/2" long and 7" high. Front opening is 11-1/2" x 3-3/8". Bottom is straight cut, no flange. Bottom is oval shaped and is 21-1/4" long X 13" wide.
|
|
|
|
|
|
|
SC264: BOLT-ON AERO-DYNAMIC SCOOP 6" HIGH (internal mounting flange). This scoop is the same as the SC-274, except only 6" tall.
|
|
|
|
|
|
|
SC274: New bolt on Aero-dynamic scoop..features low profile (7" height) w/internal mounting flange for mounting to steel/fiberglass hood. Inside mounting flange won't allow bolts to show. Bottom mounting flange has slight curve to match the hood contour.
|
|
|
|
|
|
|
SC284: New bolt on Aero-dynamic scoop! Features low profile (8" height). Has internal mounting flange for mounting to steel/fiberglass hood. Inside mounting flange won’t allow bolts to show. Bottom mounting flange has slight curve to match hood contour.
|
|
|
|
|
|
|
SC294: New bolt on Aero-dynamic scoop! Features 9" height/profile. Has internal mounting flange for mounting to steel/fiberglass hood. Inside mounting flange won’t allow bolts to show. Bottom mounting flange has slight curve to match hood contour.
|
|
|
|
|
|
|
PR6: This scoop is a replica of the '69 429 Mustang Boss Pro Scoop. It is 4" high and is fully open in the front. Mounting can be done with bolts or rivets. Mounting flange is external, but this scoop can be molded into the hood if desired.
|
|
|
|
|
|
|
PR63: Scoop replica of the 429 Boss Mustang. Same as PR-6, but w/ an internal flange for easy bolting to steel or fiberglass hood. Bottom flange has a slight curve to match the exact contour of the 69-70 Mustang hood, but will fit other hoods.
|
|
|
|
|
|
|
AB702c: Carbon Fiber Aero-Bubble 12 high x 62 x23 wide.
|
|
|
|
|
|
|
PR702c: Carbon Fiber with Black Gel Coat. This scoop was designed to be cut down or left full size to fit your turbos, throttle body or nitrous set-ups under the hood.
|
|
|
|
|
|
|
PR702cc: Carbon Fiber with CLEAR Gel Coat for Carbon Fiber look. This scoop was designed to be cut down or left full size to fit your turbos, throttle body or nitrous set-ups under the hood.
|
|
|
|
|
|
|
PR2: Outside mounting flange.
This replica is the rare Challenger T/A hood scoop. Full open interior allows maximum clearance for your carburetion. Exterior flange permits user to fasten to hood by using rivets or sheet metal screws.
|
|
|
|
|
|
|
PR23: Same as PR2, but has INSIDE mounting flange.
This replica is the rare Challenger T/A hood scoop. Full open interior allows maximum clearance for your carburetion. Rear section (20" long) allows 21-1/2" width clearance underneath.
|
|
|
|
|
|
|
SC105: Replica of 69-70 Cobra Jet Mach-1 Mustang. It eliminates the turn signal lights which are mounted in the rear of the scoop. Full outside flange aids in riveting or bolting to your hood. This scoop can also be molded in for that finished look.
|
|
|
|
|
|
|
SC116: Fully bolt on cowl induction scoop. Internal 2" wide flange for easy mounting. Will cover up hole in your hood that was cut to accommodate the #SC284 aero-scoop (SC284 also mounts with internal flange). Mounting bolts are supplied with this scoop.
|
|
|
|
|
|
|
SC108: Our most popular scoop, this replica of the notorious Z28 Camaro cowl induction, features a full 2 1/4 inch height. Designed to be riveted or screwed on to an original steel hood, it can also be glassed and molded into any of our fiberglass hoods.
|
|
|
|
|
|
|
SC109: This scoop features the same fine qualities as the SC108, but is an additional 6 inches longer. It is most commonly attached to larger hoods like 68 Fire-bird or 70-81 Trans-Am.
|
|
|
|
|
|
|
SC328: Scoop is designed to fit 87-92 Mustang hood. Height is 2 1/4. Overall length is 47". Overall width is 31" at the back (including outside mounting flange). Flange size is 1-1/4", leaving actual scoop width of 28". Scoop tapers toward the front.
|
|
|
|
|
|
|
SC114: Another Unlimited Products exclusive! This scoop has been specially designed for mounting to shorter hoods like 67-69 Camaros. It reaches a full 3-1/2" height at 19" from front and will clear most high rise carburetor applications.
|
|